How do you hook up a bathroom sink drain

09.06.2017

how do you hook up a bathroom sink drain

ice maker hookup to hot water

Press the lever on the top and see if the drain stopper moves with it. To prepare the chrome ring that goes above the sink, put a generous ring of plumber's putty around the underside of the ring. Get the necessary tools for the job. Turn on the water and check for leaks. If you need to install a new pop-up drain for any reason, these instructions will simplify the process. Do not over-tighten this nut, but you should not be able to easily spin the drain from side to nathroom by turning the pipe under the sink. Chrome traps may look classy, but they corrode quickly. Continue to 7 of 9 below. Please Enter Your Bathrolm Term Here. Trending in Your Area Just Approved: Let the adhesive cure. If you do not have plumber's putty or cannot use it on your type of sink, then you can use silicone or even a foam or rubber gasket that comes with some pop-up assemblies. Step 5 — Install the P-trap Now, install the new P-trap. Also, wear a face mask to keep yourself from inhaling any mold spores or other airborne contaminants that might be ice maker hookup to hot water in the trap Next, you need to make sure the water is turned off completely. There will always be some water left in the drain, so put a pan or bucket under the sink. Loosen the slip nut at the top of the P-trap. Ylu it's really clogged, you can't ice maker hookup to hot water a pipe snake past the pop-up. Remove the sink top from the vanity base.

The curvy pipe under your sink is called the P-trap. Also, its shape makes it possible to recover dropped items like wedding rings that may otherwise be lost in the drain. Hair, accumulated soap, and dirt can all clog the drain over time, but this can be easily fixed. It is relatively simple to remove and replace a leaky or clogged P-trap without spending the money on a plumber. Before you start, put on your gloves to protect your hands from any contaminated or decayed material that you might come in contact with during the process.

Also, wear a face mask to keep yourself from inhaling any mold spores or other airborne contaminants that might be present in the trap. Next, you need to make sure the water is turned off completely. Turn off the taps, but rdain close the valves under the sink. Test that the water is completely off by turning the tap on once more.

Then, place the bucket below the drain before pulling out the P-trap to capture any fluid or objects from spill bathromo when you remove it. Use a pair of channel-lock pliers to loosen the nuts at the top and bottom of the Ice maker hookup to hot water. After loosening the nuts, unscrew them the rest of the way with your hand. Once the nuts are off, carefully remove the P-trap, ensuring that the contents do not fall anywhere other than the bucket placed under it.

Empty out all the contents of the trap. Expect all kinds of debris such as hair, slime, and dirt. This is where the gloves come in handy. If you are looking for an object that could have fallen into the drain, you should be able to spot it hoook you empty the contents. Use a bottle brush to scrub out the inside, as this how do you hook up a bathroom sink drain get rid of all the extra buildup in the drain and will help prevent further blockages.

This should all be more than enough to solve the problem of unclogging the drain, but if the trap is broken or worn, you should replace it at this time. Chrome traps may look classy, but they corrode quickly. To ensure you get the correct size P-trap for a replacement, take the old one with you to the hardware store. A plastic P-trap comes with a complete package, that is, nuts and gaskets included. Now, install the new P-trap. It should easily fit into place, and the threaded ends should be wrapped with Teflon tape.

Use the wrench or channel-locks to turn the nuts just past hand tight. Once everything has been screwed in place, turn on the water supply, and test the P-trap by running water through it. Check for any leaks at the connections and make sure the sink is draining properly. We welcome your comments and suggestions. All information is provided "AS IS. Questions dain a Do It Yourself nature should be submitted to our " DoItYourself.

You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here. Forgot Username or Password? Don't Have an account? Hi 0 Logout Connect with Facebook Login Sign Up. How to Repair a Bathroom Sink Drain P-trap How to Repair a Bathroom Sink Drain P-trap. Step 1 — Prepare Before you start, put on your gloves to protect your hands from any contaminated or decayed material that you might come in contact with during the process.

Also, wear a face mask to keep yourself from inhaling any mold spores or other airborne contaminants that might be present in the trap Next, you need to make sure the water is turned off completely. Step 2 — Remove the P-trap Use a pair of channel-lock pliers to loosen the nuts at the top and bottom of the P-trap. Step btahroom — Empty and Clean the P-trap Empty out all the contents of the trap. Drrain 5 — Install the P-trap Now, install the new P-trap. Step 6 — Test It Once everything has been screwed in place, turn on the water supply, and test the P-trap ice maker hookup to hot water running water through it.

Got a New Project You're Proud of? Post it on Your Projects! Terms of the Trade: What Is a P-Trap? How yoou Install a Garbage Disposer. Permanent Solutions for Your Temporary F. Permanent Solutions for Your Temporary Fixes. Drain Cleaner and Opener Information. How to Remove a Pedestal Sink.

It's easy to forget all about the little pop- up drain in your bathroom sink, until it malfunctions and ruins your day. A pop- up drain looks simple, but there's a whole. Assemble the faucet and drain on the sink before you install it on the vanity. To see the steps, check out our How to Install a Bathroom Faucet video. A bathroom sink pop- up is a very convenient feature, and while installation is usually easy, occasionally the process not quite as. By the time you install a vanity cabinet and drop the sink into it, the rough-in plumbing for the drain should be done. If it is, you'll see a 2-inch plastic pipe.